Filter
Top Products
R5975238 BARCOVISION 701 MULTIMEDIA 070497
GUIDED ADJUSTMENT MODE
GUIDED ADJUSTMENT MODE
GUIDED ADJUSTMENT MODE
GUIDED ADJUSTMENT MODE
R5975238 BARCOVISION 701 MULTIMEDIA 070497
7-11
7-11
Vertical Centerline Bow Adjustment
The vertical centerline bow
adjustment corrects for curva-
ture in the horizontal direction
in the middle of the picture for
the vertical lines.
Push the control disk to the
left or to the right to adjust the
vertical centerline bow of the
setup pattern and then press
the
ENTER
key to continue.
Vertical centerline
Correct by pushing
the control disk to
the right
Correct by pushing
the control disk to
the left
Vertical Centerline Skew Adjustment
The vertical centerline skew
function corrects for tilting of
the vertical lines in the middle
of the picture.
Push the control disk to the
right or to the left to adjust the
vertical centerline skew of the
setup pattern until this line is
straight. Misalignment of the
outer vertical lines will be cor-
rected with the bow and key-
stone corrections. Press
EN-
TER
to continue.
Vertical centerline
Correct by pushing
the control disk to
the right
Correct by pushing
the control disk to
the left
Vertical Centerline Bow Adjustment
The vertical centerline bow
adjustment corrects for curva-
ture in the horizontal direction
in the middle of the picture for
the vertical lines.
Push the control disk to the
left or to the right to adjust the
vertical centerline bow of the
setup pattern and then press
the
ENTER
key to continue.
Vertical centerline
Correct by pushing
the control disk to
the right
Correct by pushing
the control disk to
the left
Vertical Centerline Skew Adjustment
The vertical centerline skew
function corrects for tilting of
the vertical lines in the middle
of the picture.
Push the control disk to the
right or to the left to adjust the
vertical centerline skew of the
setup pattern until this line is
straight. Misalignment of the
outer vertical lines will be cor-
rected with the bow and key-
stone corrections. Press
EN-
TER
to continue.
Vertical centerline
Correct by pushing
the control disk to
the right
Correct by pushing
the control disk to
the left