Filter
Top Products
R5975238 BARCOVISION 701 MULTIMEDIA 070497
RANDOM ACCESS ADJUSTMENT MODE
RANDOM ACCESS ADJUSTMENT MODE
R5975238 BARCOVISION 701 MULTIMEDIA 070497
RANDOM ACCESS ADJUSTMENT MODE
RANDOM ACCESS ADJUSTMENT MODE
8-9 8-9
Line Doubler
Line doubling is only possible for Video, S-Video or Component Video images on
standard line frequency.
To eliminate the video line patterns and to improve the image stability, the line
doubler has to be switched on. The line doubler is default set in the ON position
when starting up for the first time. The setting of the line doubler will be saved
together with the source number. Each time this source number is selected, the
last saved version will be loaded.
Highlight
Line Doubler
with the
control disk and press
ENTER
to toggle between
ON (active)
and
OFF (non active)
.
PICTURE TUNING
Select with or
<ENTER> to accept
<EXIT> to return
COLOR BALANCE
SYNC : FAST
DECODING : IRE
LINE DOUBLER : ON
ENTER
will toggle Sync between FAST and
SLOW
EXIT
will return to the Randam Access Ad-
justment menu.
ENTER
will toggle Enhanced Blue be-
tween ON and OFF
EXIT
will return to the Random access
main menu.
ADJUST
returns to operational mode
PICTURE TUNING
Select with or
<ENTER> to accept
<EXIT> to return
WHITE BALANCE
SYNC : FAST
ENHANCED BLUE : ON
Enhanced Blue On/Off Adjustment
Highlight
ENHANCED BLUE
by
pushing the control disk up or
down and press
ENTER
to tog-
gle between
ON
and
OFF
.(only
available when RGB signals
are connected)
When 'Enhanced Blue' is ON,
the blue color will be displayed
as cyan.
Note: Enhanced blue is only
used when an RGBS or RGsB
analog signal from a computer
is being displayed. Enhanced
blue is not recommended for
non computer generated im-
ages.
For displaying graphics, this
'Enhanced Blue' function could
falsify the color reproduction.
In this case, put Enhanced Blue
OFF.
Line Doubler
Line doubling is only possible for Video, S-Video or Component Video images on
standard line frequency.
To eliminate the video line patterns and to improve the image stability, the line
doubler has to be switched on. The line doubler is default set in the ON position
when starting up for the first time. The setting of the line doubler will be saved
together with the source number. Each time this source number is selected, the
last saved version will be loaded.
Highlight
Line Doubler
with the
control disk and press
ENTER
to toggle between
ON (active)
and
OFF (non active)
.
PICTURE TUNING
Select with or
<ENTER> to accept
<EXIT> to return
COLOR BALANCE
SYNC : FAST
DECODING : IRE
LINE DOUBLER : ON
ENTER
will toggle Sync between FAST and
SLOW
EXIT
will return to the Randam Access Ad-
justment menu.
ENTER
will toggle Enhanced Blue be-
tween ON and OFF
EXIT
will return to the Random access
main menu.
ADJUST
returns to operational mode
PICTURE TUNING
Select with or
<ENTER> to accept
<EXIT> to return
WHITE BALANCE
SYNC : FAST
ENHANCED BLUE : ON
Enhanced Blue On/Off Adjustment
Highlight
ENHANCED BLUE
by
pushing the control disk up or
down and press
ENTER
to tog-
gle between
ON
and
OFF
.(only
available when RGB signals
are connected)
When 'Enhanced Blue' is ON,
the blue color will be displayed
as cyan.
Note: Enhanced blue is only
used when an RGBS or RGsB
analog signal from a computer
is being displayed. Enhanced
blue is not recommended for
non computer generated im-
ages.
For displaying graphics, this
'Enhanced Blue' function could
falsify the color reproduction.
In this case, put Enhanced Blue
OFF.