Filter
Top Products
R5975238 BARCOVISION 701 MULTIMEDIA 070497
CONTROLLING
CONTROLLING
R5975238 BARCOVISION 701 MULTIMEDIA 070497
CONTROLLING
CONTROLLING
5-11
5-11
Tint Control
Tint is only active for Video and S-
Video. Tint control is effective
only when using the NTSC 4.43 or
NTSC 3.58 system. A bar scale
gives a visual indication on the
screen of the current tint setting
while pressing the + or - buttons
(RCU) or pushing the control disk
to the left or to the right (local
keypad). If the bar scale is not
visible on the screen, press the
'
TEXT
' key once and retry the
above indicated buttons.
The bar scale increases when
pressing on the + button and de-
creases when pressing the - but-
ton.
Sharpness Control.
Sharpness control only active for
Video and S-Video. A bar scale
gives a visual indication on the
screen of the current sharpness
setting while pressing the + or -
buttons (RCU) or pushing the con-
trol disk to the left or to the right
(local keypad). If the bar scale is
not visible on the screen, press
'
TEXT
' key once and retry the
above indicated buttons.
The bar scale increases when
pressing on the + button (sharper
picture) and decreases when
pressing on the - button (softer
picture).
TINT
70
SHARPNESS
3 dB
The Pause key.
When the Pause key is pressed, the image projection is stopped but the projector
remains with full power for immediate restart.
To restart the image :
- Press the Pause key,
- Select a source number.
Tint Control
Tint is only active for Video and S-
Video. Tint control is effective
only when using the NTSC 4.43 or
NTSC 3.58 system. A bar scale
gives a visual indication on the
screen of the current tint setting
while pressing the + or - buttons
(RCU) or pushing the control disk
to the left or to the right (local
keypad). If the bar scale is not
visible on the screen, press the
'
TEXT
' key once and retry the
above indicated buttons.
The bar scale increases when
pressing on the + button and de-
creases when pressing the - but-
ton.
Sharpness Control.
Sharpness control only active for
Video and S-Video. A bar scale
gives a visual indication on the
screen of the current sharpness
setting while pressing the + or -
buttons (RCU) or pushing the con-
trol disk to the left or to the right
(local keypad). If the bar scale is
not visible on the screen, press
'
TEXT
' key once and retry the
above indicated buttons.
The bar scale increases when
pressing on the + button (sharper
picture) and decreases when
pressing on the - button (softer
picture).
TINT
70
SHARPNESS
3 dB
The Pause key.
When the Pause key is pressed, the image projection is stopped but the projector
remains with full power for immediate restart.
To restart the image :
- Press the Pause key,
- Select a source number.