Filter
Top Products
SERVICE MODE
R5975228 BARCOVISION 701 MULTIMEDIA 070597
SERVICE MODE
SERVICE MODE
R5975228 BARCOVISION 701 MULTIMEDIA 070597
SERVICE MODE
9-149-14
Deletion of all blocks
If you are certain you wish to delete
all blocks, press
ENTER
to confirm,
otherwise press
EXIT
to return.
Once
ENTER
is pressed, all block
headers and adjustment settings are
permanently removed and cannot be
restored.
ENTER
gives a confirmation message
before deleting.
EXIT
returns to the Path Selection
main menu.
Select with or
then <ENTER>
<EXIT> to return.
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GR CONVERGENCE MID
DELETE ALL BLOCKS
All 32 blocks
will be deleted !
<ENTER> to confirm
<EXIT> to cancel
All settings to midposition
Item is password protected.
Highlight
'All settings to midposition'
with the control disk and press
EN-
TER
to set all settings to their
midposition.
A confirmation menu will be displayed
first.
Highlight
'delete all blocks'
with the
control disk and press
ENTER
.
Select with or
then <ENTER>
<EXIT> to return.
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GR CONVERGENCE MID
ENTER
displays a Confirmation screen.
EXIT
returns to the Service menu.
Deletion of all blocks
If you are certain you wish to delete
all blocks, press
ENTER
to confirm,
otherwise press
EXIT
to return.
Once
ENTER
is pressed, all block
headers and adjustment settings are
permanently removed and cannot be
restored.
ENTER
gives a confirmation message
before deleting.
EXIT
returns to the Path Selection
main menu.
Select with or
then <ENTER>
<EXIT> to return.
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GR CONVERGENCE MID
DELETE ALL BLOCKS
All 32 blocks
will be deleted !
<ENTER> to confirm
<EXIT> to cancel
All settings to midposition
Item is password protected.
Highlight
'All settings to midposition'
with the control disk and press
EN-
TER
to set all settings to their
midposition.
A confirmation menu will be displayed
first.
Highlight
'delete all blocks'
with the
control disk and press
ENTER
.
Select with or
then <ENTER>
<EXIT> to return.
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GR CONVERGENCE MID
ENTER
displays a Confirmation screen.
EXIT
returns to the Service menu.