Filter
Top Products
R5975238 BARCOVISION 701 MULTIMEDIA 070497
APPENDIX B : ORBITING
APPENDIX B : ORBITING
R5975238 BARCOVISION 701 MULTIMEDIA 070497
APPENDIX B : ORBITING
APPENDIX B : ORBITING
B-5
B-5
Adjustment procedure multiple projector installations :
Important : to allow corrections in the deviation alignments of the slave projectors,
never adjust the deviations of the master projector to its maximum.
Default setting of the Master projector see 'Stand alone projector'.
Highlight
'ADJUST DEVIATION'
with the control disk and press
ENTER
.
When adjusting the horizontal and
the vertical deviation, the picture
moves in the corresponding direc-
tion, allowing the set up of the
deviation without orbiting opera-
tion.
ENTER
will select the Orbiting Adjust-
ment menu.
EXIT
returns to the Path Selection menu.
HORIZONTAL
ORBIT AMPL
70
VERTICAL
ORBIT AMPL
70
A
djust vertical deviation by pushing
t
he control disk up or down
A
djust horizontal deviation by pushing
t
he control disk to the left or to the right
SLAVE ORBITING
<EXIT> to return
SELECT WITH OR
THEN <ENTER>
DEVIATION ADJUST :
VERTICAL WITH OR
HORIZONTAL WITH OR
CHANGE TO MASTER
ADJUST DEVIATION
Push the control disk to the left
(right) or up (down) to toggle be-
tween Hor. and Vert. deviation
adjustment.
Adjustment procedure multiple projector installations :
Important : to allow corrections in the deviation alignments of the slave projectors,
never adjust the deviations of the master projector to its maximum.
Default setting of the Master projector see 'Stand alone projector'.
Highlight
'ADJUST DEVIATION'
with the control disk and press
ENTER
.
When adjusting the horizontal and
the vertical deviation, the picture
moves in the corresponding direc-
tion, allowing the set up of the
deviation without orbiting opera-
tion.
ENTER
will select the Orbiting Adjust-
ment menu.
EXIT
returns to the Path Selection menu.
HORIZONTAL
ORBIT AMPL
70
VERTICAL
ORBIT AMPL
70
Adjust vertical deviation by pushing
the control disk up or down
Adjust horizontal deviation by pushing
the control disk to the left or to the right
SLAVE ORBITING
<EXIT> to return
SELECT WITH OR
THEN <ENTER>
DEVIATION ADJUST :
VERTICAL WITH OR
HORIZONTAL WITH OR
CHANGE TO MASTER
ADJUST DEVIATION
Push the control disk to the left
(right) or up (down) to toggle be-
tween Hor. and Vert. deviation
adjustment.