Barco R9000740 Home Theater Screen User Manual


  Open as PDF
of 161
 
APPENDIX B : ORBITING
APPENDIX B : ORBITING
APPENDIX B : ORBITING
APPENDIX B : ORBITING
R5975238 BARCOVISION 701 MULTIMEDIA 070497
R5975238 BARCOVISION 701 MULTIMEDIA 070497
B-2
B-2
Master/slave toggle
Highlight '
CHANGE TO SLAVE
'
with the control disk and press
ENTER
to set the projector as
Slave.
Highlight
'CHANGE TO MASTER'
with the control disk and press
ENTER
to set the projector as
Master.
Orbiting ON/OFF toggle (only in Master Orbiting)
Highlight
'MODE : ON'
with the
control disk and press
ENTER
to
set the ORBITING OFF.
Highlight
'MODE : OFF'
with the
control disk and press
ENTER
to
set the ORBITING ON.
MASTER ORBITING
<EXIT> to return
SELECT WITH OR
THEN <ENTER>
DEVIATION ADJUST :
VERTICAL WITH OR
HORIZONTAL WITH OR
CHANGE TO SLAVE
MODE: ON
SPEED: FAST
ADJUST DEVIATION
SLAVE ORBITING
<EXIT> to return
SELECT WITH OR
THEN <ENTER>
DEVIATION ADJUST :
VERTICAL WITH OR
HORIZONTAL WITH OR
CHANGE TO MASTER
ADJUST DEVIATION
MASTER ORBITING
<EXIT> to return
SELECT WITH OR
THEN <ENTER>
DEVIATION ADJUST :
VERTICAL WITH OR
HORIZONTAL WITH OR
CHANGE TO SLAVE
MODE: ON
SPEED: FAST
ADJUST DEVIATION
ENTER
toggles between mode on and
off.
EXIT
returns to the Path Selection menu.
Master/slave toggle
Highlight '
CHANGE TO SLAVE
'
with the control disk and press
ENTER
to set the projector as
Slave.
Highlight
'CHANGE TO MASTER'
with the control disk and press
ENTER
to set the projector as
Master.
Orbiting ON/OFF toggle (only in Master Orbiting)
Highlight
'MODE : ON'
with the
control disk and press
ENTER
to
set the ORBITING OFF.
Highlight
'MODE : OFF'
with the
control disk and press
ENTER
to
set the ORBITING ON.
MASTER ORBITING
<EXIT> to return
SELECT WITH OR
THEN <ENTER>
DEVIATION ADJUST :
VERTICAL WITH OR
HORIZONTAL WITH OR
CHANGE TO SLAVE
MODE: ON
SPEED: FAST
ADJUST DEVIATION
SLAVE ORBITING
<EXIT> to return
SELECT WITH OR
THEN <ENTER>
DEVIATION ADJUST :
VERTICAL WITH OR
HORIZONTAL WITH OR
CHANGE TO MASTER
ADJUST DEVIATION
MASTER ORBITING
<EXIT> to return
SELECT WITH OR
THEN <ENTER>
DEVIATION ADJUST :
VERTICAL WITH OR
HORIZONTAL WITH OR
CHANGE TO SLAVE
MODE: ON
SPEED: FAST
ADJUST DEVIATION
ENTER
toggles between mode on and
off.
EXIT
returns to the Path Selection menu.
 previous next