Filter
Top Products
RANDOM ACCESS ADJUSTMENT MODE
R5975238 BARCOVISION 701 MULTIMEDIA 070497
RANDOM ACCESS ADJUSTMENT MODE
R5975238 BARCOVISION 701 MULTIMEDIA 070497
8-20
RANDOM ACCESS ADJUSTMENT MODE
8-20
RANDOM ACCESS ADJUSTMENT MODE
Horizontal Size Adjustment
Push the control disk up or
down to highlight
H SIZE
on
the Geometry menu and then
press
ENTER
.
GEOMETRY
Select with or
then <ENTER>
<EXIT> to return
H PHASE
RASTER SHIFT
LEFT - RIGHT (E-W)
TOP - BOTTOM (N-S)
H SIZE
V LINEARITY
V SIZE
BLANKING
ENTER
will select horizontal size adjust-
ment
EXIT
returns to random access adjustment
mode menu.
ADJUST
returns to operational mode
H SIZE
70
Adjust the horizontal size by
pushing the control stick to the
right or to the left until the exact
image width is obtained.
Note :
- if the internal # pattern was
selected, this pattern re-
mains on the screen.
- if the genlocked pattern was
selected, the external source will be
displayed.
A bar scale and a number indicator give
a visual indication of the horizontal size
adjustment.
Hint : In order to avoid loss of resolution
in the projected image and to ensure
maximum CRT longevity, do not use an
excessively small horizontal size set-
ting.
EXIT
will return to Geometry
Ideal image size
H size too
small
H size too
large
Horizontal Size Adjustment
Push the control disk up or
down to highlight
H SIZE
on
the Geometry menu and then
press
ENTER
.
GEOMETRY
Select with or
then <ENTER>
<EXIT> to return
H PHASE
RASTER SHIFT
LEFT - RIGHT (E-W)
TOP - BOTTOM (N-S)
H SIZE
V LINEARITY
V SIZE
BLANKING
ENTER
will select horizontal size adjust-
ment
EXIT
returns to random access adjustment
mode menu.
ADJUST
returns to operational mode
H SIZE
70
Adjust the horizontal size by
pushing the control stick to the
right or to the left until the exact
image width is obtained.
Note :
- if the internal # pattern was
selected, this pattern re-
mains on the screen.
- if the genlocked pattern was
selected, the external source will be
displayed.
A bar scale and a number indicator give
a visual indication of the horizontal size
adjustment.
Hint : In order to avoid loss of resolution
in the projected image and to ensure
maximum CRT longevity, do not use an
excessively small horizontal size set-
ting.
EXIT
will return to Geometry
Ideal image size
H size too
small
H size too
large