Filter
Top Products
SERVICE MODE
R5975228 BARCOVISION 701 MULTIMEDIA 070597
SERVICE MODE
SERVICE MODE
R5975228 BARCOVISION 701 MULTIMEDIA 070597
SERVICE MODE
9-169-16
ENTER
sets the convergence set-
tings to their midposition.
EXIT
can-
cels the procedure to set the conver-
gence settings to their midposition.
R & B CONVERGENCE MID
Convergence settings
in current block
wil be overwritten !
<ENTER> to confirm
<EXIT> to cancel
Undo R & B convergence mid
When "R & B convergence mid" is
selected, all convergence settings
are set to their midposition. To
cancel this action, select 'Undo R &
B convergence mid' by pushing the
control disk up or down and press
ENTER. 'Undo R & B convergence
mid' is displayed in the Memory man-
agement menu in stead off 'R & B
convergence mid' when this latter is
pressed.
An undo is possible as long as the
projector is playing on the same
source (= same adjustment block)
even when some adjustments are
already readjusted. When undo is
presssed all settings are reset to the
previous settings.
Select with or
then <ENTER>
<EXIT> to return.
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
UNDO R & B CONVERGENCE MID
GR CONVERGENCE MID
Select with or
then <ENTER>
<EXIT> to return.
MEMORY MANAGEMENT
Green convergence mid
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GR CONVERGENCE MID
Only available when the projector is
equipped with green convergence
adjustmentes.
Highlight 'Gr convergence mid' by
pushing the control disk up or down
and press
ENTER
to switch off the
green convergence.
ENTER
sets the convergence set-
tings to their midposition.
EXIT
can-
cels the procedure to set the conver-
gence settings to their midposition.
R & B CONVERGENCE MID
Convergence settings
in current block
wil be overwritten !
<ENTER> to confirm
<EXIT> to cancel
Undo R & B convergence mid
When "R & B convergence mid" is
selected, all convergence settings
are set to their midposition. To
cancel this action, select 'Undo R &
B convergence mid' by pushing the
control disk up or down and press
ENTER. 'Undo R & B convergence
mid' is displayed in the Memory man-
agement menu in stead off 'R & B
convergence mid' when this latter is
pressed.
An undo is possible as long as the
projector is playing on the same
source (= same adjustment block)
even when some adjustments are
already readjusted. When undo is
presssed all settings are reset to the
previous settings.
Select with or
then <ENTER>
<EXIT> to return.
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
UNDO R & B CONVERGENCE MID
GR CONVERGENCE MID
Select with or
then <ENTER>
<EXIT> to return.
MEMORY MANAGEMENT
Green convergence mid
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GR CONVERGENCE MID
Only available when the projector is
equipped with green convergence
adjustmentes.
Highlight 'Gr convergence mid' by
pushing the control disk up or down
and press
ENTER
to switch off the
green convergence.