Filter
Top Products
R5975238 BARCOVISION 701 MULTIMEDIA 070497
RANDOM ACCESS ADJUSTMENT MODE
RANDOM ACCESS ADJUSTMENT MODE
R5975238 BARCOVISION 701 MULTIMEDIA 070497
RANDOM ACCESS ADJUSTMENT MODE
RANDOM ACCESS ADJUSTMENT MODE
8-11 8-11
Geometry Adjustments
The geometry adjustments have to be done only on the green image. These
adjustments are automatically implemented for the other color images : Left-right
(EW) and Top-Bottom corrections, blanking, Horizontal amplitude, vertical
amplitude, vertical linearity and Horizontal phase.
Highlight
GEOMETRY
by
pushing the control disk up or
down and press
ENTER
to dis-
play the geometry menu.
RANDOM ACCESS
ADJUSTMENT MODE
Select with or
<ENTER> to accept
<EXIT> to return
PICTURE TUNING
GEOMETRY
CONVERGENCE
COLOR SELECT
ENTER
will display Geometry menu
EXIT
will return to Internal Crosshatch Se-
lection or Setup Pattern Selection Menu
ADJUST
returns to operational mode
Within the geometry adjust
menu, the following adjust-
ments are available :
- horizontal phase (not for in-
ternal # pattern).
- raster shift
- left-right corrections
- top-bottom corrections
- horizontal size
- vertical linearity
- vertical size
- blanking
GEOMETRY
Select with or
then <ENTER>
<EXIT> to return
H PHASE
RASTER SHIFT
LEFT - RIGHT (E-W)
TOP - BOTTOM (N-S)
H SIZE
V LINEARITY
V SIZE
BLANKING
The convergence corrections
are disabled during geometry
corrections. The blanking cor-
rections are only enabled dur-
ing the blanking adjustments.
ENTER
will display the selected option
EXIT
will return to Random Access Adjust-
ment Mode main menu
ADJUST
returns to operational mode
Geometry Adjustments
The geometry adjustments have to be done only on the green image. These
adjustments are automatically implemented for the other color images : Left-right
(EW) and Top-Bottom corrections, blanking, Horizontal amplitude, vertical
amplitude, vertical linearity and Horizontal phase.
Highlight
GEOMETRY
by
pushing the control disk up or
down and press
ENTER
to dis-
play the geometry menu.
RANDOM ACCESS
ADJUSTMENT MODE
Select with or
<ENTER> to accept
<EXIT> to return
PICTURE TUNING
GEOMETRY
CONVERGENCE
COLOR SELECT
ENTER
will display Geometry menu
EXIT
will return to Internal Crosshatch Se-
lection or Setup Pattern Selection Menu
ADJUST
returns to operational mode
Within the geometry adjust
menu, the following adjust-
ments are available :
- horizontal phase (not for in-
ternal # pattern).
- raster shift
- left-right corrections
- top-bottom corrections
- horizontal size
- vertical linearity
- vertical size
- blanking
GEOMETRY
Select with or
then <ENTER>
<EXIT> to return
H PHASE
RASTER SHIFT
LEFT - RIGHT (E-W)
TOP - BOTTOM (N-S)
H SIZE
V LINEARITY
V SIZE
BLANKING
The convergence corrections
are disabled during geometry
corrections. The blanking cor-
rections are only enabled dur-
ing the blanking adjustments.
ENTER
will display the selected option
EXIT
will return to Random Access Adjust-
ment Mode main menu
ADJUST
returns to operational mode