Filter
Top Products
D-129
Cisco Transport Manager Release 7.2 User Guide
78-17630-01
Appendix D Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards
Optical Cards
D.4.6.10 Info Tab
The Info tab allows you to view nominal operating values set during manufacturing for the OC3
IR/STM1 SH 1310-8 module.
Note See Table 1-20 on page 1-44 for descriptions of actions that can be performed using the buttons at the
bottom of the window.
D.4.7 Slot Properties—OC48
The Slot Properties pane displays information about the Cisco ONS 15600 slot that is selected in the NE
Explorer tree. Use this properties pane to change the module performance monitoring thresholds.
For the OC48 module, the Slot Properties pane displays the following tabs: Module View, Identification,
Line, STS, Loopback, Transceiver, Protection, Alarm Behavior, and J1 Path Trace.
D.4.7.1 Module View Tab
The Module View tab displays a graphic of the OC48 that is installed in the slot. The number of critical,
major, minor, and warning alarms for the module is displayed under Alarm Status. (Alarms are also
displayed when you move the mouse pointer over the graphic.) The Suppress Alarms check box is
read-only and indicates whether all alarms are suppressed for the card and its port(s). Right-clicking the
graphic opens a shortcut menu that you can use to reset, delete, or change the card.
Mode Displays the path trace mode (Off/None, Auto, or Manual).
C2 Represents a machine-generated J1/J2 payload label byte.
Mismatch Indicates whether there is a mismatch in the C2 byte received.
Vcat Member
Number
Displays the virtual concatenation (VCAT) member number.
Display Click the Display button to view the circuit trace information. See 7.2.21.2 Viewing a J1 Path Trace from
the NE Explorer, page 7-134 for more information.
Retrieve Click the Retrieve button to retrieve J1 path trace information.
Table D-135 Field Descriptions for the J1 Path Trace Tab (continued)
Field Description
Table D-136 Field Descriptions for the Info Tab
Field Description
Extended Manufacturing Information
Attribute Displays the nominal card specification.
Value Displays the value of the attribute.