Filter
Top Products
D-43
Cisco Transport Manager Release 7.2 User Guide
78-17630-01
Appendix D Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards
Multirate Cards
D.3.2.3.1 Provision Pluggable Dialog Box
Click the Create button to launch the Provision Pluggable dialog box. The Provision Pluggable dialog
box allows you to provision pluggable entities; for example, the PPM and PIM, and to create the ports
inside these entities. See C.1.7.5.1 Provision Pluggable Dialog Box, page C-37 for more information.
D.3.2.3.2 Create Port Dialog Box
Use the Create Port dialog box to configure the port rate for a particular pluggable port module (PPM).
In the Port Rate field, use the drop-down list to select the new port rate and click OK.
D.3.2.4 Line Tab (ONS 15454 SONET)
The Line tab allows you to view and update optical line performance monitoring information. The Line
tab contains the following subtabs:
• D.3.2.4.1 Line Config Subtab, page D-43
• D.3.2.4.2 Line Thresh 15 Min Subtab, page D-46
• D.3.2.4.3 Line Thresh 1 Day Subtab, page D-47
• D.3.2.4.4 Physical Thresh 15 Min Subtab, page D-48
• D.3.2.4.5 Physical Thresh 1 Day Subtab, page D-48
• D.3.2.4.6 Section Thresh 15 Min Subtab, page D-49
• D.3.2.4.7 Section Thresh 1 Day Subtab, page D-49
• D.3.2.4.8 Alarm Thresholds Subtab, page D-50
D.3.2.4.1 Line Config Subtab
The Line Config subtab allows you to view and change the line settings of the MRC-12 card.
Table D-51 Field Descriptions for the Line Config Subtab
Field Description
Port Number Displays the port number.
Port Name Allows you to add a name for the optical port.
Administration State The port administration state. It can be:
• IS—In Service.
• IS, AINS—Automatic In Service.
• OOS, DSBLD—Out of Service, Disabled.
• OOS, MT—Out of Service, Maintenance.
Port Rate Sets the rate of the new port.