Filter
Top Products
D-33
Cisco Transport Manager Release 7.2 User Guide
78-17630-01
Appendix D Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards
Multirate Cards
Admin State The port administration state. It can be:
• IS—In Service.
• IS, AINS—Automatic In Service.
• OOS, DSBLD—Out of Service, Disabled.
• OOS, MT—Out of Service, Maintenance.
Service State Overall availability of the entity. Values are:
• IS_NR—In Service–Normal.
• OOS_AU—Out of Service–Autonomous.
• OOS_MA—Out of Service–Management.
• OOS_AUMA—Out of Service–Autonomous and Management.
In addition, a secondary state provides additional information about the status of the entity. Values
for secondary state are:
• MEA—Mismatch of equipment due to invalid equipment insertion.
• UEQ—Unequipped. There is nothing in the slot.
• UAS—Unassigned. The entity does not exist, has not been created, or has been deleted.
• SWDL—Software download in progress.
• MT—Maintenance, as per the Admin State change.
• AINS—Automatic In Service.
• DSBLD—Traffic is disabled on the entity.
• LPBK—Port or connection has a loopback on it.
• FLT—Fault secondary state. When an entity is faulted, an FLT state is raised. Equipment and
ports in FLT state should be cleared as they transition. Transition states are listed in
Table 11-10 on page 11-15.
See Table 11-10 on page 11-15 for the Service state/Secondary state possible values.
Note If the NE release does not support the Service state, this field shows N/A.
Link State Displays the physical port state. Possible values are Up, Down, or Not Present.
Flow Control Displays the negotiated flow control mode. Values are None, Symmetrical, and Asymmetrical.
Negotiation Status Displays the result of the most-recent auto-negotiation. The type of flow control that was
negotiated will be displayed.
Auto Negotiation Allows you to enable the card to match the speed and duplex mode of a partner node.
Max Frame Sets the maximum frame size.
Flow Control Low Sets the low flow control buffer level.
Flow Control High Sets the high flow control buffer level.
Table D-40 Field Descriptions for the Ether Line Tab (continued)
Field Description