Filter
Top Products
D-246
Cisco Transport Manager Release 7.2 User Guide
78-17630-01
Appendix D Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards
Transponder Cards
D.5.9.5 Input Power Tab
The Input Power tab allows you to assign performance monitoring thresholds for the power entering the
receive transponder.
D.5.9.6 Output Power Tab
The Output Power tab allows you to assign performance monitoring thresholds for the receive
transponder output power.
Note See Table 1-20 on page 1-44 for descriptions of actions that can be performed using the buttons at the
bottom of the window.
D.5.10 Slot Properties—RXT-10G-N
The Slot Properties pane displays information about the directly modulated Receive Transponder–10
Gbps–Normal (RXT-10G-N) module that is installed in the slot selected in the NE Explorer tree. Use
this properties pane to change the module performance monitoring thresholds.
A block diagram is shown in the following figure.
Figure D-16 Cisco ONS 15800 or ONS 15801 Receive Transponder–10 Gbps–Normal
Table D-302 Field Descriptions for the Input Power Tab
Field Description
Input Power
Value When the Update button is clicked, displays the current receive transponder input power.
Low Sets the low threshold for the receive transponder input power in dBm and the alarm severity level.
High Sets the high threshold for the receive transponder input power (in dBm) and the alarm severity level.
Table D-303 Field Descriptions for the Output Power Tab
Field Description
Output Power
Value When the Update button is clicked, displays the current receive transponder output power.
Low Sets the low threshold for the receive transponder output power (in dBm) and the alarm severity level.
High Sets the high threshold for the receive transponder output power (in dBm) and the alarm severity level.