Filter
Top Products
D-70
Cisco Transport Manager Release 7.2 User Guide
78-17630-01
Appendix D Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards
Optical Cards
Service State Displays the service state:
• IS_NR—In Service–Normal.
• OOS_AU—Out of Service–Autonomous.
• OOS_MA—Out of Service–Management.
• OOS_AUMA—Out of Service–Autonomous and Management.
In addition, a secondary state provides additional information about the status of the entity. Values for
secondary state are:
• MEA—Mismatch of equipment due to invalid equipment insertion.
• UEQ—Unequipped; there is nothing in the slot.
• UAS—Unassigned; the entity does not exist, has not been created, or has been deleted.
• SWDL—Software download in progress.
• MT—Maintenance, as per the Admin State change.
• AINS—Automatic in service.
• DSBLD—Traffic is disabled on the entity.
• LPBK—Port or connection has a loopback on it.
• FLT—Fault secondary state. When an entity is faulted, an FLT state is raised. Equipment and ports
in FLT state should be cleared as they transition. Transition states are listed in Table 11-10 on page
11-15.
See Table 11-10 on page 11-15 for the Service state/Secondary state possible values.
Note If the NE does not support the Service State, this field shows N/A.
AINS Soak Automatic in-service soak. The determination of duration left before the traffic/termination transitions
to IS state.
AINS Soak Count
Down
Automatic in-service soak countdown. Displays the remaining time of valid input signal in hh:mm, after
which the card becomes in service (IS) automatically.
Line Threshold 15 Minutes
Near End
Port Number The optical port number
ES-L Errored seconds–line
SES-L Severely errored seconds–line
CV-L Coding violations–line
UAS-L Unavailable seconds–line
FC-L Failure count–line
PSC Protection switching count
PSD Protection switching duration
PSC-W Protection switching count–working
PSD-W Protection switching duration–working
Far End
Table D-84 Field Descriptions for the Line Tab (continued)
Field Description