Filter
Top Products
D-52
Cisco Transport Manager Release 7.2 User Guide
78-17630-01
Appendix D Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards
Multirate Cards
AINS Soak Count Down (H:M) Automatic in-service soak countdown. Displays the remaining time of valid input signal
in hh:mm, after which the card becomes in service (IS) automatically.
Admin SSM If the node does not receive an SSM signal, it defaults to STU (synchronization
traceability unknown). Admin SSM allows you to override the STU value with one of the
following:
• PRS—Primary reference source (Stratum 1)
• STS2—Stratum 2
• TNC—Transit node clock
• STS3E—Stratum 3E
• STS3—Stratum 3
• SMC—SONET minimum clock
• ST4—Stratum 4
Send <FF> DoNotUse When checked, sends a special do not use (DUS) (0xff) message on the S1 byte.
PJ VC-4 Mon# Sets the VC that will be used for pointer justification. If set to 0, no VC is monitored. Only
one VC can be monitored on each STM port.
Table D-59 Field Descriptions for the Line Config Subtab (continued)
Field Description