Filter
Top Products
D-143
Cisco Transport Manager Release 7.2 User Guide
78-17630-01
Appendix D Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards
Optical Cards
D.4.8.5 Loopback Tab
The Loopback tab allows you to view and update OC48 IR 1310 loopback information.
D.4.8.6 Protection Tab
The Protection tab allows you to view and update OC48 IR 1310 protection group information.
ES-P Errored seconds–path
SES-P Severely errored seconds–path
UAS-P Unavailable seconds–path
FC-P Failure count–path
PPJC-Pdet Positive pointer justification count, STS path detected
NPJC-Pdet Negative pointer justification count, STS path detected
PPJC-Pgen Positive pointer justification count, STS path generated
NPJC-Pgen Negative pointer justification count, STS path generated
PJCS-Pdet Positive pointer justification count, STS path detected
PJCS-Pgen Positive pointer justification count, STS path generated
PJC-Diff The sum of the absolute values of differences between positive transmitted and received, and negative
transmitted and received. The important metric on pointer justification is not the exact counts, but how
many were absorbed.
Customer Info
STS Number The STS number
Customer ID The user-defined customer ID number
Service ID The user-defined service ID number
Table D-147 Field Descriptions for the STS Tab (continued)
Field Description
Table D-148 Field Descriptions for the Loopback Tab
Field Description
Port Number Displays the port number.
State Displays the status of the line. The line can be In Service (IS), In Service–Auto In Service Soak
(IS_AINS), Out of Service (OOS), or Out of Service–Maintenance (OOS_MT).
Loopback Type Allows you to configure a port to terminal loopback (Inward) or Facility (Line), or clear the current
loopback (none).
Note The line state must be OOS_MT before you can configure the loopback type.
Table D-149 Field Descriptions for the Protection Tab
Field Description
Protection Groups Displays a list of available protection groups.
Protection Group Details Displays details about the selected protection group.