Filter
Top Products
D-213
Cisco Transport Manager Release 7.2 User Guide
78-17630-01
Appendix D Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards
Transponder Cards
Note See Table 1-20 on page 1-44 for descriptions of actions that can be performed using the buttons at the
bottom of the window.
D.5 Transponder Cards
This section describes the following transponder cards supported within CTM:
• D.5.1 Slot Properties—BT10E-LCxx and BT10E-LLxx, page D-213
• D.5.2 Slot Properties—FEC-LEM, page D-219
• D.5.3 Slot Properties—LEM, page D-223
• D.5.4 Slot Properties—LEM-10-B1, page D-225
• D.5.5 Slot Properties—LEM-10G-Nxx, page D-229
• D.5.6 Slot Properties—LEM-EM-M, page D-232
• D.5.7 Slot Properties—LT, page D-235
• D.5.8 Slot Properties—RT, page D-240
• D.5.9 Slot Properties—RXT, page D-244
• D.5.10 Slot Properties—RXT-10G-N, page D-246
• D.5.11 Slot Properties—RXT-10H-M, page D-249
• D.5.12 Slot Properties—RXT-B1, page D-252
• D.5.13 Slot Properties—RXT-FEC, page D-256
• D.5.14 Slot Properties—Transmitter Transponder, page D-259
• D.5.15 Slot Properties—WCM, page D-264
• D.5.16 Slot Properties—WCM-10G-Nxx, page D-267
• D.5.17 Slot Properties—WCM-FEC, page D-270
• D.5.18 Slot Properties—WCM-EM-Fxx, page D-274
• D.5.19 Slot Properties—WCM-EM-Mxx, page D-279
• D.5.20 Slot Properties—WCM10, page D-283
D.5.1 Slot Properties—BT10E-LCxx and BT10E-LLxx
The Slot Properties pane displays information about the Cisco ONS 15808 module that is installed in the
slot selected in the NE Explorer tree. Use this properties pane to change the module performance
monitoring thresholds.
The bidirectional line transponder (BT10E-LCxx and BT10E-LLxx) performs a rate adaptation between
the 10 GE client interface (10.312 Gbps) and the FEC payload rate (9.9532 Gbps). The BT10E-LCxx
and BT10E-LLxx support a constant flow of maximum Ethernet packet length (1518 bytes) with a
minimum average IPG =10.5. BT10E cards can support jumbo frames with a maximum packet length of
12000 bytes.
The Slot Properties pane displays the following tabs: Module View, Identification, Transmit Direction,
Receive Direction, and Action.