Filter
Top Products
D-243
Cisco Transport Manager Release 7.2 User Guide
78-17630-01
Appendix D Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards
Transponder Cards
D.5.8.5 Power Tab
The Power tab allows you to assign thresholds and alarm severities for the transponder laser power
levels.
D.5.8.6 Input Power Tab
The Input Power tab allows you to assign thresholds and alarm severities for the power coming into the
transponder lasers.
D.5.8.7 Output Power Tab
The Output Power tab allows you to assign thresholds and alarm severities for the transponder output
power.
Note See Table 1-20 on page 1-44 for descriptions of actions that can be performed using the buttons at the
bottom of the window.
Table D-296 Field Descriptions for the Power Tab
Field Description
Laser 1
Value When the Update button is clicked, displays the current power of Laser 1 (in mW).
Low Sets the low threshold for the Laser 1 power, in mW, and the alarm severity level.
High Sets the high threshold for the Laser 1 power, in mW, and the alarm severity level.
Table D-297 Field Descriptions for the Input Power Tab
Field Description
Input Power 1
Value When the Update button is clicked, displays the current transponder input power (in dBm).
Low Sets the low threshold for the input power, in dBm, and the alarm severity level.
High Sets the high threshold for the input power, in dBm, and the alarm severity level.
Fail Sets the failure threshold for the input power, in dBm, and the alarm severity level.
Table D-298 Field Descriptions for the Output Power Tab
Field Description
Output Power 1
Value When the Update button is clicked, displays the current transponder output power (in dBm).
Low Sets the low threshold for the output power, in dBm, and the alarm severity level.
High Sets the high threshold for the output power, in dBm, and the alarm severity level.
Fail Sets the failure threshold for the output power, in dBm, and the alarm severity level.