Filter
Top Products
D-224
Cisco Transport Manager Release 7.2 User Guide
78-17630-01
Appendix D Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards
Transponder Cards
D.5.3.3 Temperature Tab
The Temperature tab allows you to assign thresholds and alarm severities for the transponder laser.
D.5.3.4 Current Tab
The Current tab allows you to assign thresholds and alarm severities for the transponder laser current
levels.
D.5.3.5 Power Tab
The Power tab allows you to assign thresholds and alarm severities for the transponder Laser 1 power
levels.
Slot ID Displays the identification number of the slot containing the transponder.
Software Version Displays the version of the software running on the module.
BIOS Version Displays the version number of the BIOS.
Board Serial Number Displays the serial number of the board.
SCC Number Displays the version of the module serial communication controller (SCC).
Product Option Displays the product option. Displays “Not Available” if TL1 Agent version is earlier than version
2.1.
Hardware Version Displays the version of the hardware. Displays “Not Available” if TL1 Agent version is earlier than
version 2.1.
Line Direction Shows the line direction for the transponder.
State Allows you to place the transponder in one of two states: In Service or Under Maintenance.
PM Collection Status Allows you to enable or disable PM data collection for the transponder.
Table D-259 Field Descriptions for the Identification Tab (continued)
Field Description
Table D-260 Field Descriptions for the Temperature Tab
Field Description
Value When the Update button is clicked, displays the current temperature of the transponder laser.
Low Sets the low temperature threshold (in degrees Celsius) and the alarm severity level.
High Sets the high temperature threshold (in degrees Celsius) and the alarm severity level.
Table D-261 Field Descriptions for the Current Tab
Field Description
Value When the Update button is clicked, displays the current value of the laser current.
Degrade Sets the degrade threshold for the laser current (in mA) and the alarm severity level.
Fail Sets the failure threshold for the laser current (in mA) and the alarm severity level.