Filter
Top Products
D-6
Cisco Transport Manager Release 7.2 User Guide
78-17630-01
Appendix D Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards
FC_MR-4 Card
D.1.1.7 J1 Path Trace Tab
The J1 Path Trace tab allows you to view and retrieve FC_MR-4 J1 path trace information.
D.1.1.8 GBIC Inventory Tab
The GBIC Inventory tab allows you to view GBIC inventory information.
Table D-7 Field Descriptions for the RMON Thresholds Tab
Field Description
Index Number A unique value that identifies the different thresholds currently existing on the NE.
Slot Select a slot for the new FC_MR threshold.
Port Select a port for the selected slot. If you select All, the threshold will be created on all ports for that
slot. This operation may take several minutes to complete.
Variable Select a variable for the new FC_MR threshold. Available variables will differ based on the type of
card selected in the Slot field.
Alarm Type Select an alarm type for the new FC_MR threshold. Indicate whether the event will be triggered by the
rising threshold, falling threshold, or both the rising and falling thresholds.
Sample Type Select a sample type for the new FC_MR threshold. Available sample types are relative and absolute.
Relative restricts the threshold to using the number of occurrences in the user-set sample period.
Absolute sets the threshold to use the total number of occurrences, regardless of time period.
Sample Period Enter a sample period for the new FC_MR threshold. The sample period is measured in seconds.
Rising Threshold Enter a rising threshold for the new FC_MR threshold. The value must be equal to or greater than the
falling threshold value.
Falling Threshold Enter a falling threshold for the new FC_MR threshold. The value must be equal to or less than the
rising threshold value.
Create Click the Create button to create an FC_MR threshold.
Delete Select an FC_MR threshold from the list displayed and click the Delete button.
Table D-8 Field Descriptions for the J1 Path Trace Tab
Column Description
Port Number Displays the port number.
STS Number/VC4 Number Displays the STS or VC4 number.
Expected String Displays the current expected string.
Received String Displays the current received string.
Mode Displays the path trace mode (Off/None, Auto, or Manual).
C2 Represents a machine-generated J1/J2 payload label byte.
Mismatch Indicates whether there is a mismatch in the C2 byte received.
Vcat Mem Num Displays the virtual concatenation (VCAT) member number.