Filter
Top Products
D-205
Cisco Transport Manager Release 7.2 User Guide
78-17630-01
Appendix D Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards
Optical Cards
D.4.22.9 J1 Path Trace Tab
The J1 Path Trace tab allows you to view and retrieve STM-64 LH 1550 J1 path trace information.
Note See Table 1-20 on page 1-44 for descriptions of actions that can be performed using the buttons at the
bottom of the window.
D.4.23 Slot Properties—STM-64 LR/LH 4 (ONS 15600 SDH)
The Slot Properties pane displays information about the Cisco ONS 15600 SDH slot that is selected in
the NE Explorer tree. Use this properties pane to change the module performance monitoring thresholds.
The STM-64 LR/LH 4 port 1550 card provides 4 long-haul STM-64 ITU-T G.9691 L-64.2c compliant
signals. The ports operate at the ITU-T G.707 compliant 9953.28 Mbps rate over a single-mode fiber
span. The card has four physical connector adapters with 2 fibers per connector adapter. The card VC4
payloads and concatenated payloads at VC4, VC4-4c, VC4-8c, VC4-16c, or VC-64c signal levels.
For the STM-64 LR/LH 4 module, the Slot Properties pane displays the following tabs: Module View,
Identification, Line, VC-4, Loopback, Transceiver, Protection, Alarm Behavior, and J1 Path Trace.
D.4.23.1 Module View Tab
The Module View tab displays a graphic of the STM-64 LR/LH 4 that is installed in the slot. The number
of critical, major, minor, and warning alarms for the module is displayed under Alarm Status. (Alarms
are also displayed when you move the mouse pointer over the graphic.) The Suppress Alarms check box
is read-only and indicates whether all alarms are suppressed for the card and its port(s). Right-clicking
the graphic opens a shortcut menu that you can use to reset, delete, or change the card.
D.4.23.2 Identification Tab
The Identification tab allows you to view and update STM-64 LR/LH 4 identification information.
Table D-231 Field Descriptions for the J1 Path Trace Tab
Field Description
Port Number Displays the port number.
STS Number Displays the STS number.
Expected String Displays the current expected string.
Received String Displays the current received string.
Mode Displays the path trace mode (Off/None, Auto, or Manual).
C2 Represents a machine-generated J1/J2 payload label byte.
Mismatch Indicates whether there is a mismatch in the C2 byte received.