Cisco Systems 78-17630-01 TV Cables User Manual


 
D-63
Cisco Transport Manager Release 7.2 User Guide
78-17630-01
Appendix D Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards
Multirate Cards
D.3.2.9 Protection Tab
The Protection tab allows you to view and update MRC-12 protection group information.
D.3.2.10 Alarm Behavior Tab
The Alarm Behavior tab allows you to view and update alarm profile information.
Service State Overall availability of the entity. Values are:
IS_NR—In Service–Normal.
OOS_AU—Out of Service–Autonomous.
OOS_MA—Out of Service–Management.
OOS_AUMA—Out of Service–Autonomous and Management.
In addition, a secondary state provides additional information about the status of the entity. Values
for secondary state are:
MEA—Mismatch of equipment due to invalid equipment insertion.
UEQ—Unequipped. There is nothing in the slot.
UAS—Unassigned. The entity does not exist, has not been created, or has been deleted.
SWDL—Software download in progress.
MT—Maintenance, as per the Admin State change.
AINS—Automatic In Service.
DSBLD—Traffic is disabled on the entity.
LPBK—Port or connection has a loopback on it.
FLT—Fault secondary state. When an entity is faulted, an FLT state is raised. Equipment and
ports in FLT state should be cleared as they transition. Transition states are listed in Table 11-10
on page 11-15.
See Table 11-10 on page 11-15 for the Service state/Secondary state possible values.
Note If the NE release does not support the Service state, this field shows N/A.
Send AIS on Facility
Loopback
When selected, sends AIS on the facility loopback.
Send AIS on Terminal
Loopback
When selected, sends AIS on the terminal loopback.
Table D-75 Field Descriptions for the Loopback Tab (continued)
Field Description
Table D-76 Field Descriptions for the Protection Tab
Field Description
Protection Groups Displays a list of available protection groups.
Protection Group Details Displays details about the selected protection group.