Filter
Top Products
D-133
Cisco Transport Manager Release 7.2 User Guide
78-17630-01
Appendix D Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards
Optical Cards
PSC Protection switching count.
PSD Protection switching duration.
PSC-W Protection switching count–working.
PSD-W Protection switching duration–working.
Far End
Port Number The optical port number.
ES-L Errored seconds–line.
SES-L Severely errored seconds–line.
CV-L Coding violations–line.
UAS-L Unavailable seconds–line.
FC-L Failure count–line.
Physical Thresh 15 Minutes
Port No. Port number.
LBC-HIGH Laser bias current maximum. Cisco default is (15 min): 150 percent.
LBC-LOW Laser bias current minimum. Cisco default is (15 min): 50 percent.
OPT-HIGH Optical power transmitted maximum. Cisco default is (15 min): 120 percent.
OPT-LOW Optical power transmitted minimum. Cisco default is (15 min): 80 percent.
OPR-HIGH Optical power received maximum. Cisco default is (15 min): 200 percent.
OPR-LOW Optical power received minimum. Cisco default is (15 min): 50 percent.
Set OPR Setting the optical power received (OPR) establishes the received power level as 100 percent.
If the receiver power decreases, then the OPR percentage decreases to reflect the loss in
receiver power. For example, if the receiver power decreases 3 dBm, the OPR decreases 50
percent.
Physical Thresh 1 Day
Port No. Port number.
LBC-HIGH Laser bias current maximum. Cisco default is (15 min): 150 percent.
LBC-LOW Laser bias current minimum. Cisco default is (15 min): 50 percent.
OPT-HIGH Optical power transmitted maximum. Cisco default is (15 min): 120 percent.
OPT-LOW Optical power transmitted minimum. Cisco default is (15 min): 80 percent.
OPR-HIGH Optical power received maximum. Cisco default is (15 min): 200 percent.
OPR-LOW Optical power received minimum. Cisco default is (15 min): 50 percent.
Set OPR Setting the optical power received (OPR) establishes the received power level as 100 percent.
If the receiver power decreases, then the OPR percentage decreases to reflect the loss in
receiver power. For example, if the receiver power decreases 3 dBm, the OPR decreases 50
percent.
Table D-138 Field Descriptions for the Line Tab (continued)
Subfield Description