Filter
Top Products
D-216
Cisco Transport Manager Release 7.2 User Guide
78-17630-01
Appendix D Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards
Transponder Cards
D.5.1.3.5 Output Power Subtab
The Output Power subtab allows you to assign thresholds and alarm severities for the transponder output
power.
D.5.1.3.6 QoS 15 Min and QoS 1 Day Subtabs
The QoS 15 Min and QoS 1 Day subtabs allow you to assign thresholds and alarm severities for quality
of service (QoS) counters. Click the QoS 15 min tab to assign thresholds for 15-minute collection
increments. Click the QoS 1 day tab to assign thresholds for 24-hour collection increments. The two tabs
have identical fields.
Table D-244 Field Descriptions for the Input Power Subtab
Field Description
Input Power 1
Value When the Update button is clicked, displays the current transponder input power (in dBm).
Fail Sets the failure threshold for the input power, in dBm, and the alarm severity level.
Low Sets the low threshold for the input power, in dBm, and the alarm severity level.
High Sets the high threshold for the input power, in dBm, and the alarm severity level.
Table D-245 Field Descriptions for the Output Power Subtab
Field Description
Output Power
Value When the Update button is clicked, displays the current transponder output power (in dBm).
Low Sets the low threshold for the output power, in dBm, and the alarm severity level.
High Sets the high threshold for the output power, in dBm, and the alarm severity level.
Fail Sets the failure threshold for the output power, in dBm, and the alarm severity level.
Table D-246 Field Descriptions for the QoS 15 Min and QoS 1 Day Subtabs
Field Description
Runts Packets Number of transmitted runt frames (packets). Runts are packets less then 64 bytes long but well
formed.
Giants Packets Number of received giants frame (packets). Giants are well formed packets greater then 1518
bytes
Total Errors Displays the total number of received errors.
Total CRC Number of transmitted packets (length = 64 -1518) with bad Frame Check Sequence (FCS).
Total PCS Errored Block The number of decoding errored blocks.
Total Oversize Packets Number of transmitted frames (packets) exceeding the configured buffer size and that will be
dropped.