Honeywell HRHD 410 DVR User Manual


 
Operation
Rev 3.01 82 Document 900.0315
10/05
Playback Controls
Table 4-1 Playback Controls
Press this button … To do this …
Left Arrow
!
Play video backward at high speed. Pressing the button again
toggles the playback speed from !! , !!!, and !!!!. The
screen displays !! , !!!, and !!!! respectively.
Note Entering Fast Backward Playback mode from Live Monitoring
mode can be password protected.
Right Arrow
"
Play video forward at high speed. Pressing the button again toggles
the playback speed from "", """, and """". The screen
displays "", """, and """" respectively.
After selecting ENTER/PAUSE, press the Up arrow to advance to the
next image.
After selecting ENTER/PAUSE, press the Down arrow to review the
previous image.
ENTER/PAUSE Pause the video on the screen. The screen displays
Camera Buttons 1 to 4 Display that camera at full screen.
QUAD/SEQ Change the display format from full screen to quad (2x2) mode.
Note Changing the display format from quad (2x2) to full screen is
not available.
Note When playing recorded video at maximum speed with very
high image quality, playback of recorded audio may be
occasionally interrupted.
Shuttle Ring The Shuttle Ring only functions in Playback mode. Turn the ring
clockwise to play video forward. Turn the ring counterclockwise to
play video backward. Playback speed varies with the amount the ring
is turned. The playback speeds are !x0.5, !!, !!!, and
!!!!, "x0.5, ", "", """, and """".
When you release the ring, it snaps back to the center position and
the video pauses.
Jog Dial The Jog Dial only functions when playback video has been paused.
Turn the jog dial clockwise to play video forward image-by-image.
Turn the jog dial counterclockwise to play video backward
image-by-image.
Note When playing recorded video at maximum speed with very
high image quality, playback of recorded audio may be
interrupted occasionally.
Note You cannot change the system setup from a remote site
during Playback mode.