Filter
Top Products
Configuration
Rev 3.01 40 Document 900.0315
10/05
Alarm Out Setup Screen
Use the Alarm Out setup screen to establish a schedule for each alarm output from the
DVR. Highlight Alarm Out from the Device menu (MENU
➤ Device ➤ Alarm-Out) and
then press # . The Alarm Out setup screen displays.
Figure 3-24 Alarm Out Screen
To give each alarm output its own title, highlight the box under the Title heading and
then press # . A virtual keyboard displays (see Figure 3-7) allowing you to enter the title.
Highlight the Sched field and press # to open a schedule screen. You can schedule
alarm output in 30-minute increments from 0:00 to 24:00.
Figure 3-25 Alarm Out Schedule Screen
You can select individual blocks of time, entire days of the week, entire blocks of time,
or the entire schedule.
• Select a specific block of time by highlighting it and then pressing # .
• Select an entire day by highlighting the day of the week or Holiday on the left of
the screen and then press # .
• Select an entire block of time by highlighting the time period at the top of the
screen and then press # .
• Select the entire screen by highlighting the empty box in the upper left corner of
the screen. Press # to toggle between No Arming (no block) to On (blue block)
to Event (yellow block).