Filter
Top Products
Configuration
Rev 3.01 61 Document 900.0315
10/05
The factory default LAN settings are:
1. Highlight the box beside DNS Server and then press # .to enter the IP address of
the DNS server. If you set the DNS Server, the domain name of the DVRNS server
instead of the IP address can be used during the DVRNS Server setup. See
DVRNS (DVR Name Service) Setup Screen, page 65 for detailed information on
DVRNS Server setup.
2. Highlight Port Number Setup … and then press # .to display the Port Number
Setup screen.
Figure 3-48 Port Number Setup Screen
Note Obtain the appropriate Port Number for each RAS related
program (Admin, Watch, Search, and Callback) from your
network administrator.
To change the number, highlight it and use the Up and Down arrow buttons to increase
or decrease the number.
The factory default Port settings are:
IP Address 192.168.1.129
Gateway 192.168.1.254
Subnet Mask 255.255.255.0
Remote Admin: 8200
Remote Watch: 8016
Remote Search: 10019
Remote Callback: 8201