Filter
Top Products
Configuration
Rev 3.01 20 Document 900.0315
10/05
Turning on the Power
Connect the power cord to the DVR to turn on the DVR. The DVR takes approximately
60 seconds to initialize.
Shuttle Ring The Shuttle Ring only functions in Playback mode. The Shuttle Ring is spring
loaded. When released, the video pauses and the ring returns to the center
position. Turn the ring clockwise to play video forward. Turn the ring
counterclockwise to play video backward.
Playback speed varies with the amount the ring is turned. The playback speeds are
!x0.5, !!, !!!, !!!!, "x0.5, ", "", """, and """".
Jog Dial The Jog Dial only functions when playback video has been paused. Turn the jog
dial clockwise to play video forward image-by-image. Turn the jog dial
counterclockwise to play video backward image-by-image.
You can also use the Jog Dial to change numerical values such as IP addresses,
date/time, and page during the system setup.
Table 3-1 Front Panel LEDs and Controls
Front panel Function (cont’d)
Shuttle Ring
Jog Dial