Filter
Top Products
Installation
Rev 3.01 10 Document 900.0315
10/05
Note For RGB Monitor output, set the CVBS (SVHS) VGA selector
switch to VGA (see Figure 2-5).
Connecting to the Network Port
Figure 2-8 Network Connector
The DVR can be networked using the 10/100Mb Ethernet connector. Connect a CAT5
cable with an RJ45 jack to the DVR connector. The DVR can be networked with a
computer for remote monitoring, searching, configuration, and software upgrades. See
Chapter 3, Configuration for configuring the Ethernet connections.
Connecting to the RS232C Port
Figure 2-9 RS232C Connector
Use the RS232C port to connect an external modem for remote monitoring,
configuration, and software upgrades, text input, and to connect a remote control
keyboard. Use a modem cable with a DV9S (female) connector to connect to the DVR.
The DVR can be networked using the 10/100Mb Ethernet connector. Connect a CAT5
cable with an RJ45 jack to the DVR connector. The DVR can be networked with a
computer for remote monitoring, searching, configuration, and software upgrades. See
Chapter 3, Configuration for configuring the Ethernet connections.
NETWORK
RS
-
232C