Filter
Top Products
Configuration
Rev 3.01 35 Document 900.0315
10/05
Alarm In Setup Screen
The alarm terminal strip on the back of the DVR has inputs associated with each alarm.
Use the Alarm In screen to configure each alarm input. Highlight Alarm In in the Device
menu (MENU
➤ Device ➤ Alarm-In) and then press # . The Alarm In setup screen
displays.
Figure 3-18 Alarm In Screen
You can turn each input On (via Alarm I/O or Camera Alarm) or Off. Each input can be
given a title, and the inputs can be set as NO (normally open) or NC (normally closed)
independently.
Motion Detector
Your DVR has a built-in video motion detector. Use the Motion Detector screen to turn
video motion detection On or Off for each camera and to define the area of the image
where you want to detect motion.
Highlight Motion Detector in the Device menu (MENU
➤ Device ➤ Motion Detector)
and then press # . The Motion Detector setup screen displays.
Figure 3-19 Motion Detector Screen