Honeywell HRHD 410 DVR User Manual


 
Configuration
Rev 3.01 45 Document 900.0315
10/05
Note When the DVR is in Panic Recording mode, it ignores time-lapse
or event recording settings and follows the panic recording
settings.
The maximum panic recording speed is 30 images per second
(25 ips for PAL) when the resolution is set to Standard. However,
when set to High, the recording speed decreases to 15 ips (12.5
ips for PAL).
When the DVR is recording video, a red dot appears on the
screen. When the DVR is in Panic Recording mode, a white !
appears in the red dot and the REC LED on the front panel
flickers.
5. You can set the DVR to record video based on time-lapse recording schedules
defined during time-lapse recording setup. Highlight the box beside Time-Lapse
Recording and then press # to toggle between On and Off.
6. Highlight the box beside Auto Deletion. Press # . to toggle between On and Off.
When set to On, the DVR deletes video recorded earlier than the user-defined
period. Highlight the second box beside Auto Deletion and then press # . to select
the length of time recorded data will be kept, from 1 to 99 days.
Caution When the End of Disk is set to Stop, the DVR will NOT restart
recording, even after video recorded earlier than the user-defined
period is deleted.
7. To save your changes, highlight OK and then press # . Selecting Cancel exits the
screen without saving the changes.