Filter
Top Products
Configuration
Rev 3.01 68 Document 900.0315
10/05
Callback Center Setup by LAN Connections
Highlight Callback Center (MENU ➤ Network ➤ Callback Center) and then press
# . The Callback Center Setup screen displays.
Figure 3-53 Callback Center Setup Screen
1. Highlight the box beside IP Address and enter the IP address of the computer
you want contacted during an event.
2. Highlight the box beside Retry and enter the number of times you would like the
DVR to try contacting the computer. You can select from 1 to 10 retries.
3. Highlight the box beside E-mail notification and then press # to toggle between
On and Off.
4. Highlight the box beside SMTP Server IP and enter the SMTP server IP address,
obtained from your system administrator.
5. Highlight the box beside E-mail recipient and enter the recipient's e-mail address.
Use the virtual keyboard (see Figure 3-7) to enter the e-mail address.
6. Highlight the box beside E-mail sender and enter the sender's e-mail address.
Note The e-mail address must include the character @ to be a valid
address.