Filter
Top Products
Configuration
Rev 3.01 50 Document 900.0315
10/05
Alarm In Event Action (Alarm Out) Setup Screen
Use this screen to set how the DVR reacts to events differently by activating an internal
buzzer or external alarms.
Figure 3-33 Alarm In Event Action (Alarm Out) Screen
1. Highlight the Sched box and then press # . A schedule screen displays. Set the
schedule as described earlier.
2. Highlight the Alarm Out box and select either Beep and/or the alarm output
terminal that you want to associate with the sensor.
3. Highlight the Dwell Time box and set the length of time you want the output
activated.
Alarm In Event Action (Notify) Setup Screen
Use this screen to set the DVR to notify the remote site when certain events are
activated.
Figure 3-34 Alarm In Event Action (Notify) Setup Screen
1. Highlight the Sched box and then press # . A schedule screen displays. Set the
schedule as described earlier.
2. Highlight the Notify box and then press # . This toggles between On and Off.