Filter
Top Products
Configuration
Rev 3.01 53 Document 900.0315
10/05
2. Highlight the Notify box and then press # . This toggles between On and Off.
When it is On, the DVR notifies the remote site when certain events occur based
on a defined schedule.
Note For the Notify action to work, the DVR should be registered in the
RAS (Remote Administration System).
Text-In Event Action (Record) Setup Screen
Use this screen to set how the DVR reacts to text input from the text-in device. You can
assign the text-in a schedule, associated camera, recording speed, video quality, and
dwell time.
Figure 3-38 Text-In Event Action (Record) Screen
1. Highlight the Sched box and then press # . A schedule screen displays. Set the
schedule as described earlier.
2. Highlight the Camera box and then press # . A camera selection screen displays.
Select the camera number you would like to associate with the text-in device.
Note You cannot associate multiple cameras with a text-in device.
3. Highlight the Speed box and select the number of images per second you would
like to record from the drop-down list.
4. Highlight the Quality box and select the image quality you want to record from the
drop-down list.
5. Highlight the Dwell Time box and then set the length of time you would like to
record for the text input.