Filter
Top Products
Configuration
Rev 3.01 73 Document 900.0315
10/05
Figure 3-58 Disk Partition Selection Screen
After you select the drive and partition to use for clip copy, the DVR displays the
drive capacity, the clip size, and asks if you want to continue.
Note We recommend that you do not copy files larger than 2 GB.
You can use other functions on the DVR while video is being backed up. To do this,
highlight Close and then press # . You can return to the Clip Copy screen at any time
to check the progress.
Note You can not end the clip copy process during CD burning.
Refer to the Remote Administration System (RAS) User Guide for instructions on how to
review the images you have copied.
Note During clip copy, you cannot change the system date and time,
shut the system down, switch to the Quick Setup mode, clear all
data, or change the system setup from a remote site.
Note The recording speed decreases to 1 ips per camera during CD
burning or while the DVR is preparing clip copy data on the hard
disk drive.