Filter
Top Products
Operation
Rev 3.01 79 Document 900.0315
10/05
Figure 4-5 Preset View Screen
Set Speed
To change the pan and tilt speed:
1. Select Set Speed in the PTZ menu.
2. Change the number from 1 to 16 using the Left and Right arrow buttons. After you
have selected the speed you want, press # . If the camera does not support speed
control, Set Speed cannot be selected on the PTZ menu.
Figure 4-6 PTZ Speed Controller
Digital Zoom Mode
You can enter Digital Zoom mode by pressing the PTZ button on the front panel while
in PTZ mode.
Note You cannot enter Digital Zoom mode when the DVR detects
video loss on the selected camera or the camera is turned off or
set up as Covert 1 or Covert 2.
After you are in Digital Zoom mode, a bright small box is laid over the image. The box
indicates the spot to be enlarged. To enlarge the spot, move the position of that box
using the Arrow buttons, and then press # . The enlarged screen displays . Pressing
PTZ again returns the DVR to Live Monitoring mode.