Filter
Top Products
Preparation
12
Clock Display
The VR-N900U has a clock display function that displays the
current time on the screen.
1 Press the [2/ ] button while holding down the
[FUNCTION] button.
Clock display appears on the screen.
Note
• To turn the clock display off, press the [2/ ] button again
while holding down the [FUNCTION] button.
• To move the clock display position, left click and drag the
clock display to the desired position.
About Performance Meter
The VR-N900U comes with a performance meter to indicate
VR-N900U operating load.
At high operating loads, the system may not be able to
record at the preset frame rate or operate normally.
1 Press the [1/ ] button while holding down the
[FUNCTION] button.
A performance meter is displayed on the screen.
Note
• The performance meter automatically displays when the
VR-N900U powers up.
• To turn the performance meter off, press the [1/ ] button
again while holding down the [FUNCTION] button.
• To move the display position of the performance meter,
left click and drag it to the desired position.
CAUTION
• Do not use the recorder when the performance meter is
indicated in red.
Changing monitor resolution
Press the [ZOOM OUT/CANCEL] or the [ZOOM IN/ENTER]
button while holding down the [FUNCTION] button to
change VGA output resolution.
CAUTION
• Selecting a resolution not supported by the monitor may
prevent normal monitor synchronization.
Setting/Canceling
Operation Lock
The VR-N900U is equipped with an operation lock feature is
to prevent the system from being placed into OPERATE
OFF accidentally and prevent unauthorized recording
operations.
Setting Operation Lock
1
Press the [KEY] button while holding down the
[FUNCTION] button.
Operation will be locked. The [LOCK] indicator lights up
when in operation lock mode.
Canceling Operation Lock
1
(When in operation lock mode) Press the [KEY]
button while holding down the [FUNCTION]
button.
Operation lock will be canceled. The [LOCK] indicator will
turn off.
Changing Settings
Note that any incorrect changes made to VR-N900 settings
may prevent normal operation.
Before making any changes, save current settings to the
[Flash Memory Utility] ( Page 66) to allow a return to
previous settings should anything go wrong.
It is recommended that you [Save Setting Data] before
making any changes.
Load factor less than 5% Indicated in gray
Load factor less than 60% Indicated in Green
Load factor less than 90% Indicated in Yellow
Load factor more than 90% Indicated in Red
[ZOOM IN/ENTER] button
Keypad
[FUNCTION] button
[KEY] button
[LOCK] indicator
☞