Filter
Top Products
Applications
58
● Event Rule String
Event substring:
Lets you specify the individual items for which VR-N900U
should look out when analyzing data packages.
Specify one or more terms, then click the [Add] button to add
the specified term(s) to the [Event message include] field.
When you add several terms as one item, everything
between the quotation marks must appear together in the
package, in the specified sequence, in order to match your
criterion.
Event message include:
Displays the string which will be used for the actual
package analysis. The field is not directly editable.
However, you are able to position the cursor inside the
field and click the following buttons.
Add:
Adds the content of the [Event substring] field to the
[Event message include] field.
( :
Lets you add a start parenthesis character to the [Event
message include] field.
Parentheses can be used to ensure that related terms are
processed together as a logical unit; in other words, they
can be used to force a certain processing order in the
analysis.
) :
Lets you add an end parenthesis character to the [Event
message include] field.
AND:
Lets you add an AND operator to the [Event message
include] field. With an AND operator you specify that the
terms on both sides of the AND operator must be present.
OR:
Lets you add an OR operator to the [Event message
include] field. With an OR operator, you specify that either
one or another term must be present.
Remove:
Lets you remove the item immediately to the left of a
cursor positioned in the [Event message include] field.
● Notification Settings
Send Email if this event occurs:
Select check box to send an e-mail alert when the event
occurs.
Include image from camera:
Select check box to include an image, recorded at the
time the event is triggered, in the e-mail alert, then select
the required camera in the list below the check box.
Note
• To define a timer event for a generic event, select the
required event that was added in step
2, then click the
[Add new event] button.
Event Notification Settings
You can select events for triggering event notifications and
use yellow, red and green indicators for events in the [Live
Viewing] window. The yellow indicator lights up when the
specified event has occurred, the red indicator lights up
when motion has been detected and the green indicator is
used for indicating that images are being received from a
camera.
1 Select a camera in the [Camera Record
Setting] window, then click [Settings].
A dialog box will appear.
2 Click the [Event Notifications] button.
3 Select events for triggering event notifications
from the [Available Events] list.
4 Click the button.
The selected event will be copied to the [Active Events:] list.
5 Repeat steps 2 to 4 for each event.
To remove an event for which notification has been set up,
select the event and click the button.
[Camera Settings] window
[Event Notifications] button
[Setup Notifications on Events] window