Filter
Top Products
Preparation
10
Preparation
System Connection Example
The following operations are possible with this system.
• Surveillance (live image recording/playback) by connecting
up to 9 cameras
• Checking recorded images on the VGA monitor
• Recording/playing sound
• Alarm recording
• Remote monitoring by computer
Note
• Connect LAN1 to the camera network.
• Connect LAN2 to the surveillance computer network.
• For details of the protocol and port number for the network
cameras on the LAN1 network, refer to the network
camera’s user manual.
• The protocol and port number used on the LAN2 network
are shown below.
Surveillance computer: HTTP 80
Email transmission: SMTP 25
POP 110
Analog cameras Speaker (with built-in amplifier)
AUDIO OUT
VIDEO IN
1–4
Alarm IN/OUT
AUDIO OUT
LAN1
LAN2
VGA OUT
VIDEO IN
1–4
Mic Amp
Supplied power cable
AC 120-240V 50Hz/60Hz
VGA monitor
Mouse
IP cameras
Switching HUB
Surveillance computer
Switching HUB
UPS control
Computer for configuring cameras
UPS
120V-240V
ALARM IN/OUT
REAR I/O Terminals
SERIAL
SERIAL
AUDIO IN
Microphone
* You can connect up to 9 cameras (of
which up to 4 can be analog cameras).
* You can connect up to ten surveillance
computers.
* Reverse letters denote the terminals on
the rear panel.