Filter
Top Products
55
Specify a VMD event
1 Select the required camera to specify VMD
event from the [Enabled Input Event(s)] list in
the [I/O Setup] window.
2 Click the [Add new VMD event] button.
If the selected device is a multi-camera device, such as a
network encoder (IP video server), a simple dialog in which
you select the required camera will appear.
CAUTION
• In order to be able to use the [Add new VMD event] button,
VMD events must have been defined for the network
camera.
Configuring the settings for timer events
You can define a timer event under an added event.
Timer events are separate events, triggered by the input
event under which they are defined. Timer events occur at
the specified time lapsed after the input event under which
they are defined.
1 Select the required event from the [Defined
events] list in the [I/O Setup] window.
2 Click the [Add new event] button.
The [New Timer] window will appear.
3 Specify the required amount of time and a
name for the timer event.
Timer event is started by:
Read-only field, displaying the name of the event or event
button under which the timer event is defined.
Timer event name:
Lets you specify a name for the timer event.
Timer event occurs after:
Lets you specify the amount of time that should pass
between the event occurring/event button being clicked
and the timer event. Specify the required amount of time
in either seconds or minutes.
Specify an output
1 Select the required camera from the [Defined
events] list in the [I/O Setup] window.
2 Click the [Add new output event] button.
The [Add New Output] window will appear.
[I/O Setup] window
[New Timer] window
[Add New Output] window