Filter
Top Products
79
Others
Compatible Equipment
Compatible Network Cameras
Connecting a UPS
Connecting an uninterruptible power supply (UPS) to the
hard disk will protect it from damage by automatically
powering down all operations prior to switching off the power
supply in the event of a power failure.
1 Connect the UPS communication cable to the
[SERIAL] port on the rear panel.
2 Connect the VR-N900U power cable to the UPS
power output connector.
3 Switch on the power to the UPS, then switch
on the power to the VR-N900U.
CAUTION
• Consult your nearest JVC dealer for details on the UPS
that can be used.
• Make sure the UPS communication cable is connected
before switching on the power to the VR-N900U.
• Do not disconnect the communication cable when
operations are being carried out.
• If a power failure occurs during archiving or formatting of
the hard disk, operation of the equipment may be disabled
even if it is connected to the UPS.
• The recorded images may not play back properly if they
were not archived ( Page 62) before the power failure.
Function
JPG PTZ
Audio
PTZ
Joystick
MPG4
VMD
Event
Network Camera
JVC
VN-C20
●
JVC
VN-C655
●● ●
JVC
VN-C625
●● ●
JVC
VN-E4
●●●●
JVC
VN-C215
●
AXIS 206 ●
AXIS 207 ●●●
AXIS 211 ●●●●
AXIS 216 ●●●●
AXIS 225 ●●●
Verint
S1700
●●●
Verint
S1704
●●●
Verint
S1708
●●●
Verint
S1900
●
Verint
S2700E
●
☞