Filter
Top Products
82 C1695M (8/06)
ENABLING AUDIO
TIP: You can use an optional KBD5000 keyboard or a USB PC keyboard and mouse to perform some setup tasks more easily. Refer to
Understanding DVR5100 Controls and Menus on page 31 for a comparison on using any of these devices to work with the on-screen menus.
To enable audio recording:
1. If it is not ready open, select the Configuration tab for a camera of the Devices tab on the Setup window. For information about displaying
Configuration section camera device options, refer to Displaying the Configuration Section Camera Options on page 80.
2. Navigate to the Enable Audio check box, and then select it. (Refer to Figure 69 on page 79.)
3. Select Apply to save your changes and continue working with settings on this page. Select OK to save your changes and close
the page. To retain the original settings, select Cancel . The DVR5100 main application window is displayed.
SETTING UP THE NOISE FILTER
TIP: You can use an optional KBD5000 keyboard or a USB PC keyboard and mouse to perform some setup tasks more easily. Refer to
Understanding DVR5100 Controls and Menus on page 31 for a comparison on using any of these devices to work with the on-screen menus.
To select a noise filter:
1. If it is not ready open, select the Configuration tab for a camera of the Devices tab on the Setup window. For information about displaying
Configuration section camera device options, refer to Displaying the Configuration Section Camera Options on page 80.
2. Navigate to the Noise Filter list, and then turn the jog right or left to select an option: Low, Medium, or High.
3. Select Apply to save your changes and continue working with settings on this page. Select OK to save your changes and close
the page. To retain the original settings, select Cancel . The DVR5100 main application window is displayed.
SETTING UP PICTURE QUALITY
TIP: You can use an optional KBD5000 keyboard or a USB PC keyboard and mouse to perform some setup tasks more easily. Refer to
Understanding DVR5100 Controls and Menus on page 31 for a comparison on using any of these devices to work with the on-screen menus.
To set up picture quality:
1. If it is not ready open, select the Configuration tab for a camera of the Devices tab on the Setup window. For information about displaying
Configuration section camera device options, refer to Displaying the Configuration Section Camera Options on page 80.
2. Navigate to the User System Settings check box and do one of the following:
• Check the Use System Settings box to use the picture quality selected on the System Configuration page.
• To use a custom picture quality for the selected camera, clear the Use System Settings check box, and then select a setting from the
NTSC/PAL list. You can choose several options for Low, Medium, or High quality. The numbers next to the setting indicate the number
of images per second that will be recorded. The first number is for NTSC cameras; the second is for PAL cameras. Refer to Picture
Quality Settings on page 62 for a complete list of picture quality settings.
NOTE: If the picture quality settings are changed, the affected camera will stop recording for up to five seconds. This pause will show up
as a gap in your search results for that camera.
There are several IPS rates available for each picture quality setting. Refer to Table N, Image Resolution in Pixels, on page 62, for a
description of each setting.
3. Select Apply to save your changes and continue working with settings on this page. Select OK to save your changes and close
the page. To retain the original settings, select Cancel . The DVR5100 main application window is displayed.