Filter
Top Products
Basic Installation
2
TLA 700 Series Installation Manual
Check the Environmental Requirements
Read this section before attempting any installation procedures. This section
describes site considerations, power requirements, and ground connections for
your logic analyzer.
The portable mainframe is designed to operate on a bench or on a cart in the
normal position (on the bottom feet). For proper cooling, at least two inches
(5.1 cm) of clearance is recommended on the rear and sides of the mainframe.
You can also operate the mainframe while it rests on the rear feet. If you operate
the mainframe while it is resting on the rear feet, make sure that you properly
route any cables coming out of the rear of the mainframe to avoid damaging
them.
CAUTION. Keep the bottom of the mainframe clear of obstructions to ensure
proper cooling.
The benchtop mainframe is designed to operate on a bench or in a rackmount
environment. For proper cooling, at least two inches (5.1 cm) of clearance is
recommended on the rear and sides of the mainframe.
WARNING. Because of the size and weight of the benchtop mainframe, use care
when lifting or moving the mainframe to avoid personal injury while performing
the installation procedures. Use two people to lift or move the mainframe.
Site Considerations:
Portable Mainframe
Site Considerations:
Benchtop Mainframe