Appendix B: Upgrades
54
TLA 700 Series Installation Manual
Table 6: Controller BIOS setups for the TLA 700 application (Cont.)
Parameter Factory settingSubmenu parameterFactory setting
D000 – D3FF: ROM
D400 – D7FF: ROM
D800 – DBFF: ROM
DC00 – DFFF: ROM
Boot Sequence: A: then C: Boot Delay 0
Boot Sequence: A: then C:
Setup Prompt Enabled
POST Errors Enabled
Floppy Check Enabled
Summary Screen Enabled
NUMLOCK: OFF NUMLock Off
Key Click Disabled
Keyboard auto-repeat rate 30/sec
Keyboard auto-repeat delay 1/4 sec
System Memory 640 KB
Extended Memory Installed memory – 640 K
Advanced menu
Integrated Peripherals COM A 3F8, IRQ4
COM B 2F8, IRQ3
LPT Port 378, IRQ7
LPT Mode ECP
Diskette Controller Enabled
Local Bus IDE Adapter both
Advanced Chipset Control DRAM Speed 60 ns
1
DMA Aliasing Enabled
8 Bit I/O Recovery 4.5
16 Bit I/O Recovery 4.5
IRQ12 Used By PS/2 Mouse
ECC/Parity Disabled
Plug & Play O/S No
Reset Configuration Data No
Large Disk Access Mode: DOS
Enable SimulScan Mode: Disabled