Filter
Top Products
Basic Installation
TLA 700 Series Installation Manual
5
Install the Modules
CAUTION. Do not install or remove any modules while the mainframe is powered
on; doing so can damage the modules or the logic analyzer.
If your logic analyzer does not have the modules preinstalled, install the modules
as shown in Figure 2. You can install the modules in any slot. Use a Phillips
screwdriver with a Number 1 tip to tighten the retaining screws after seating the
modules in place.
If you want to merge two logic analyzer modules to create a wider module, refer
to Appendix A: Merging Logic Analyzer Modules on page 33.
Portable mainframe Benchtop mainframe
Injector/ejector handles
Retaining screws
Figure 2: Installing modules