Filter
Top Products
Appendix B: Upgrades
60
TLA 700 Series Installation Manual
To reinstall the TLA 700 Series application software, complete the following
steps:
1. Insert the TLA 700 application floppy disk 1 in the disk drive.
2. Click Start, point to Settings, and click on Control Panel.
3. In the Control Panel window, double-click Add/Remove Programs.
4. Click on the Install button and follow the instructions on the screen for
installing the software from the floppy disk.
5. When the installation is complete, the program will prompt you to reboot the
system; click on OK to reboot.
To reinstall any other application software such as microprocessor support
software, complete the following steps:
1. Insert the first floppy disk into the disk drive.
2. Click Start, point to Settings, and click Control Panel.
3. In the Control Panel window, double-click Add/Remove Programs.
4. Click on the Install button and follow the instructions on the screen for
installing the software from the floppy disk.
After you have reinstalled all of the application software files, you should restore
any backed-up user files. Use the Windows 95 Back Up tool to restore any saved
files from floppy disks. Use the online help for instructions on restoring the files.
Reinstall the TLA 700
Series Application
Software
Reinstalling other
Application Software
Restoring User Files