Filter
Top Products
NV3000/5000/6000(EXP)/7000H User Manual
40
4.13 To Setup the PTZ/IP PTZ Camera
4.13.1 Setup the PTZ Camera
1. In the PTZ control panel, click Setup.
2. When the PTZ Setup dialog box appears, select the camera number and check the Use
PTZ box.
3. In the Connection Settings section, select the COMPort where the PTZ camera is
connected, PTZ ID number and PTZ camera protocol. Then, click Save to keep the
settings.
4. Use the PTZ control panel and adjust the position of the PTZ camera.
5. In the Preset Setting section, select the preset number to assign a number for the PTZ
camera current position. Set the DwellTime (1-60 sec) for how long the PTZ camera
stays in that position before it moves to the next one. If you want to add description,
check the Show Preset Name box and in the Preset Name text box, type the word.
When done, click Save to keep the settings.
6. Repeat step 4 & 5, if you want to save another PTZ camera position.
7. Restore AutoPan Time: set a time period for restoring auto path function after the PTZ
camera has been moved. Mark the check box and set the time period in second.
8. When is done, click OK to save the setting or Click Cancel, to leave without saving the
new setting.