Filter
Top Products
Chapter 5 Customizing NV DVR System
72
After clicking Add or Edit, you may customize the user control setting. OK to exit and accept
the setting, and Cancel to exit without saving the setting
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(1) Authorization level
Select the status of the user. Only Administrator-level can access User Setting, and reset the
Alarm status when using the Remote Console.
(2) Control Right
Enable the items that would allow the user to access.
(3) Web Viewer
Enable/disable Web Viewer control right that allow the user to operate from a remote location
using internet explorer.
- Remote Console
Allow the user to remote modify NV DVR system setting.
- Remote LogViewer
Allow the user to view the event log from remote site.
- Remote EMAP
Allow the user to view the E-map of NV DVR from remote site.
- IP Camera
Enable/disable user to add new IP camera when using the Web Viewer.
- Remote Access Time
Enable Infinite check box to access NV DVR without time limit. If you want to set time limit,
enter the number of minutes in Minute text box.
(4) Visible Camera
Select the camera number that would allow the user to access or view. To select all the
cameras, enable the ALL check box.
(5) Name
Enter the user name.