AVerMedia Technologies NV 6000 EXP DVR User Manual


 
NV3000/5000/6000(EXP)/7000H User Manual
65
5.9.1 To Setup Alarm Relay:
1. Beside the Relay Output check box, click Detail.
2. In the Alarm Relay dialog box, select from the available relay
list and in the ON column, set to enable/disable the relay
operation when the alarm is activated.
In the Retrieve time check box, you may enable/disable to
extend the relay operation time and set the duration in second.
3. Click OK to exit and accept the setting and Cancel to exit
without saving the setting.
5.9.2 To Setup the Alarm Sound Setting:
1. Beside the Play Warning Sound check box,
click Detail.
2. In the Alarm Sound Setting dialog box, click
to select other wav file from other source
or folder, Play to listen, Record to make a
new copy of a sound.
3. If you click Record, you will be prompted if
you want to replace the file. Click OK to
continue and Cancel to discontinue.
4. When the Sound Recorder appears, use the
record control panel to record, stop, play,
rewind and forward. If you want to keep the
existing file, click File > Save As…, enter
filename and click Save. Make sure you have
microphone connected to your PC.
5. Click OK to exit and accept the setting and Cancel to exit without saving the setting.