Filter
Top Products
NV3000/5000/6000(EXP)/7000H User Manual
63
7. In (6) Action, you may now set the alarm action for the system to perform when the alarm
condition is activated.
- Launch E-Map
Display mini Emap screen.
- TV Out
Switch to only display the video on TV from where the alarm is activated or selected
camera.
a. Select the camera from drop down list to specify which camera video to be
displayed on TV when the alarm is triggered.
~ Alarm Camera: when a channel has an alarm occurred, and then, the
channel video that has an alarm occurred will be displayed on TV.
~ Camera #(1~32): select the camera channel video that wants to be
displayed on TV when an alarm is activated.
b. Retrieve time: set the waiting duration before system switching back to original
display mode on TV automatically. If the retrieve time is un-mark, the alarm video
will keep displaying until user switch back to normal display mode manually. The
retrieve time range is 3~ 600 seconds.
- Enlarge Camera View
Switch to only display video in Preview/Advanced mode from where the alarm is
activated.
a. Select the camera from drop down list to specify which camera video to be
enlarged on screen when the alarm is triggered.
~ Alarm Camera: when a channel has an alarm occurred, and then, the
channel video that has an alarm occurred will be enlarged on screen.
~ Camera # (1~32): the selected channel video that will be enlarged on
screen when an alarm is activated.
b. Retrieve time: set the waiting duration before system switching back to original
Preview mode. If the retrieve time is un-mark, the alarm video will keep enlarging
until user switch back to Preview mode manually. The retrieve time range is 3~
600 seconds.